KRYPTONITE SS Series Center Link Tie Rod Package w/ PISK Kit
Fits; 2011-2019 Current Chevy/GMC 2500/3500 HD
Tie Rod Bodies now come Zinc plated under the black powdercoat to decrease corrosion.
Disclaimer: This product will not work with fabtech lift kits due to there proprietary spindle design that utilizes there outer tie rod. This PISK Support Kit will only fit a factory or Kryptonite Center Link, only in the factory position.
This insanely strong center link has been engineered to maintain all factory alignment specs and steering geometry. This steering system is modeled after the Center Link on the H1 Military Hummer, this is a much stronger design when compared to whats offered from factory on all non Hummer GM HD Trucks. Can be used with GM or aftermarket Idler/Pitman arms and PISK support system.
- 1 x Kryptonite Series Solid Center Link
- 2 x Kryptonite Series Tie Rods
- 1 x PISK3008 Pitman Idler Support
- Size: 1- 5/8 inch Hexagonal
- Material: 1144 Stress Proof Carbon Steel.
- Finish: Black Powdercoat
1144 Stress Proof Carbon steel
|4140-4130 chromoly steel|
|Tensile Strength||115,000 psi (Min.)||85,000–110,000 psi|
|Yield Strength||100,000 psi (Min.)||70,000–85,000 psi|
(Kryptonite No Fine Print Lifetime warranty)-Kryptonite steering and suspension components are warrantied for life to their original purchaser. This warranty is against any manufacturer defects, premature wear or breakage. Race it, jump it, off road it, sled pull it, wreck it, lift it, level it, lower it, I think you get it? We don’t care. If you can break it we will replace it. All Kryptonite tie rods are pre-greased with Chevron's ultra duty EP2 (Extreme Pressure) grease they should be serviced with this grease at each oil change. Your Kryptonite products must be purchased from an authorized dealer.